Rexroth MG25G1X/V THROTTLE VALVE

B:28.5 mm; Mass shaft washer:15.2 kg; r1,2 min.:3 mm; d1:415 mm; d:300 mm;

Weight W:0.51 lb; Dimension B:4.3438 in; Distance H:0.875 in; Dimension L:2.5625 in; Dimension C:1.6875 in; Shaft Diameter D:3/4 in; Basic Static Radial Load Rating Co:1470 lbf; Basic Dynamic Radial Load Rating:2380 lbf; Distance J:1.5000 in; Dimension N:0.3438 in;

Mass angle ring:0.025 kg; d:30 mm; d1 ≈:41.25 mm; r3,4 min.:0.6 mm; B1:4 mm; B2:7 mm;

B:23.80 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:28000 N; d:30.000 mm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30200 N; Accessories:One Shield; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Grease Speed Rating n1:7000 rpm;

Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:17000 N; Oil Speed Rating n2:5300 rpm; B:26.00 mm; Grease Speed Rating n1:4500 rpm; Basic Dynamic Radial Load Rating C:39700 N; D:140.0000 mm; d:80.000 mm;

Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Accessories:Two Shields; Basic Static Radial Load Rating Co:132000 N; Sealed Speed Rating n3:1500 rpm; D:250.0000 mm; B:33.00 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; d:180.000 mm; Basic Dynamic Radial Load Rating C:1190

C:20.5 mm; da max.:47 mm; T:26 mm; Ca min.:4 mm; d:40 mm; Mass bearing:0.5 kg; Limiting speed:9000 r/min; Calculation factor Y0:0.9; Dimension series:2CE; Calculation factor e:0.35;

Basic static load rating C0:38 kN; D1:132.61 mm; db min.:107 mm; r1,2 min.:1.5 mm; Static axial stiffness, preload class C:483 N/µm; Static axial stiffness, preload class B:366 N/µm; Attainable speed for grease lubrication:12700 r/min; Calculation factor (back-to-back, face-to-face) Y1:0

Basic Static Radial Load Rating Co:120000 N; Grease Speed Rating n1:3600 rpm; D:170.0000 mm; d:80.000 mm; B:39.00 mm; Oil Speed Rating n2:4700 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:143000 N;

B:14.00 mm; Grease Speed Rating n1:16000 rpm; Oil Speed Rating n2:19000 rpm; Accessories:Shield & Seal; Fillet Radius ra:1.00 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:13500 N; Oil Speed Rating Open/Shielded n2:19000 rpm; Basic Static Radial Load Rating Co:6550 N; D:47.0000 mm;

D:110.0000 mm; Accessories:Two Seals; Sealed Speed Rating n3:3800 rpm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3800 rpm; d:60.000 mm; Basic Dynamic Radial Load Rating C:78100 N; B:36.50 mm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:88000 N;

r1,2 min.:0.3 mm; D:90 mm; r3,4 min.:0.6 mm; Attainable speed:2600 r/min; Required attachment bolt size (DIN 912):M8; Basic static load rating C0:98 kN; ra max.:0.3 mm; Angle between holes in outer ring (Pitch) α:45 °; Basic dynamic load rating C:47.5 kN; Fatigue load limit Pu:3.7 kN;

Grease Speed Rating n1:6000 rpm; Basic Static Radial Load Rating Co:176000 N; d:150.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:9000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:156000 N; D:225.0000 mm; B:35.00 mm;

Calculation factor (single, tandem) Y2:0.87; Preload class A GA:300 N; d1:108.33 mm; db min.:97 mm; d2:105.5 mm; r1,2 min.:1.5 mm; da min.:97 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Preload class B GB:920 N; Calculation factor fHC:1;

Oil Speed Rating Open/Shielded n2:34000 rpm; Accessories:One Shield; D:24.0000 mm; d:15.000 mm; Sealed Speed Rating n3:17000 rpm; Basic Static Radial Load Rating Co:1250 N; Basic Dynamic Radial Load Rating C:2080 N; Grease Speed Rating Open/Shielded n1:28000 rpm; Fillet Radius ra:0.30 mm; B:5.00 mm;